SEARCH
Product Description: The intelligent hanging picture dense shelf is designed for the collection, storage, and display of medium and large-sized mounted calligraphy and paintings. Compared to storage shelves, the intelligent hanging picture dense shelf is specifically built for centralized management of calligraphy and paintings, featuring enhanced intelligence, grid-based organization, and standardization. The conventional hanging picture dense shelf has a flat surface, with the middle grid plate retracted, and lacks partition columns. It possesses dustproof, moisture-proof, and pest-proof functions.
Table 13 Reference Table for the Dimensions of the Frame Body of the Hanging Picture Dense Shelving System
Elevate | pitch | section number | foreman | Net plate clear width | Column width (excluding seal) |
2500 | 900 | 4 | 3790 | 3600mm | 560 |
2500 | 900 | 5 | 4690 | 4500mm | 560 |
2500 | 900 | 6 | 5590 | 5400mm | 560 |
2500 | 900 | 7 | 6490 | 6300mm | 560 |
Table 14. Component Specification Table
Component | Material | Technical Specifications | reference image | Performance Specifications |
Column | cold-rolled steel sheet | δ=1.5mm |
| The product adopts an integrally formed three-sided column, with a width of 50mm on the front and 36mm on the sides. It features uniformly punched hanging plate fastening holes, allowing for the adjustment of the number of layers and spacing as required. The hole spacing on the top is 45mm. The painting and manufacturing process refers to the general technical standards for the frame. |
mesh plate | cold-rolled steel sheet | δ=1.0mm |
| Use a fine steel wire mesh with a thickness of T≥4mm and a hole spacing of 40*40, surrounded by 1.5mm cold-rolled steel plate edging, with a width of 55mm. The mesh panel and cold-rolled steel plate are connected and fixed using resistance welding, and the surface is required to be free of visible irregularities. The spraying and manufacturing process should refer to the [General Technical Standards for Frame Bodies]. |
roof panel | cold-rolled steel sheet | δ=1.0mm |
| Utilizing a large-scale laser cutting machine or punching and shearing line, the material is cut in one go, ensuring a post-forming tolerance of ±0.5mm. The forming thickness is 55mm, and after spray painting, there are no visible creases or gaps around the edges. The interior is padded with 12mm-thick camphor wood boards. The spray painting and manufacturing processes refer to the aforementioned [General Technical Standards for Frame Bodies]. |
base plate | cold-rolled steel sheet | δ=1.0mm |
| Utilizing a large-scale laser cutting line or punching and shearing line, the material is cut in one go, ensuring a post-forming tolerance of ±0.5mm. The forming thickness is 20mm, and after spraying, there are no visible creases or gaps around the edges. The interior is padded with 18mm-thick camphor wood boards. The spraying and manufacturing processes refer to the aforementioned [General Technical Standards for Frame Bodies]. |
Note: For the remaining frame structures, refer to the "General Technical Standards for Frames" | ||||
